Garage Door Spring Repair & Replacement

A broken spring is the most common reason a garage door stops working. R&Y Garage Door Repair replaces torsion and extension springs the same day in Taylor and across Central Texas, with springs matched to the exact weight of the door.

Call (512) 736-7290 Request service online

R&Y technician winding a new garage door torsion spring

★ 5.0
Google rating

24/7
Emergency service

Free
Estimates

2-year
Warranty on eligible work

Quick Answer: What Should Be Done When a Garage Door Spring Breaks?

Leave the door closed, unplug the opener and call a technician. Garage door springs carry the full weight of the door and are under high tension, so replacing them is not a do-it-yourself job. R&Y Garage Door Repair replaces broken springs the same day in Taylor, Hutto, Round Rock, Georgetown, Pflugerville, Manor, Elgin and nearby cities, and answers emergencies 24/7.

Common signs: a loud bang from the garage, a gap in the spring above the door, a door that feels very heavy or an opener that lifts it only a few inches.
Torsion or extension: both types are replaced; most newer doors use torsion springs mounted above the door.
Done right: springs are sized to the door weight, installed in pairs when needed and the door is balanced and safety-tested.
Car stuck inside?: those calls are prioritized, day or night.
Estimates: free and no-obligation. Call (512) 736-7290.

Why Spring Replacement Is a Job for a Technician

A garage door can weigh 150 to 400 pounds, and the springs do almost all of the lifting. When a spring is wound, it stores enough energy to cause serious injury if a tool slips or a part fails. That is why R&Y never recommends winding or releasing springs without the right tools and training.

The other reason is fit. A spring that is slightly too strong or too weak makes the door drift, slam or strain the opener. Each R&Y replacement starts by weighing and measuring the door, so the new springs match it, and ends with a balance and auto-reverse test.

Have a Wayne Dalton door with an enclosed spring tube? That is a TorqueMaster system: see TorqueMaster spring repair & conversion.

Spring just broke?

Don’t open the door or use the opener.
Keep people, pets and cars away from it.
Call R&Y. Most springs are replaced the same day.

Call (512) 736-7290

Spring Repair Services

Every spring call includes an inspection of the cables, drums, bearings and rollers, because a broken spring often damages the parts around it.

Torsion Spring Replacement

The most common spring on modern doors. Replaced with springs rated for the door weight and wound to the correct turns.

Extension Spring Replacement

Side-mounted springs on older or lighter doors, replaced with safety cables so a broken spring cannot whip loose.

24/7 Broken Spring Service

A door stuck closed with the car inside is handled as an emergency, day or night.

High-Cycle Spring Upgrades

Longer-life springs for doors that open many times a day, so replacements are needed less often.

Cables, Drums and Bearings

Worn parts found during the inspection are replaced so the new springs are not strained.

TorqueMaster Systems

Enclosed Wayne Dalton springs are repaired or converted. See TorqueMaster spring repair.

Torsion vs. Extension Springs: What’s the Difference?

Most garage doors in Central Texas use one of these two spring types. Both can be replaced the same day.

Spring type	How it works	Good to know
Torsion spring	Mounted on a metal shaft above the door and twists to lift it	More durable and safer, standard on most newer doors
Extension spring	Runs along the upper tracks on each side and stretches to lift the door	Common on older or lighter doors; should always have safety cables
TorqueMaster	A torsion spring enclosed inside a tube above the door	Found on many Wayne Dalton doors; can be repaired or converted
High-cycle spring	A torsion spring built for more open-close cycles	Lasts longer on doors used many times a day

Not sure which springs the door has? A photo of the area above the door is usually enough to tell over the phone.

How a Spring Replacement Works

Secure the door. The door is clamped so it cannot move while the old springs are released.
Weigh and measure. The door weight, height and track setup decide the size and type of the new springs.
Replace the springs. New springs are installed, and worn cables, drums or bearings are replaced when needed.
Balance the door. Spring tension is set so the door stays put halfway up and moves smoothly.
Test everything. The opener force and auto-reverse are tested before the job is closed.

Spring broken right now? Call (512) 736-7290. Emergencies are answered 24/7.

What Customers Say

★★★★★
Rene came out the exact same day to get us taken care of. He tuned up the door and adjusted the tension, and made sure all of our remotes and the MyQ phone app were fully connected and tested before he left.

Dennis K.Same-day repair, Taylor–Google review

★★★★★
Repaired existing cranky, loose and bent door to a very smooth opening and closing. Replaced older door opener system with a new one in under 40 mins.

Rahul K.Door repair and new opener–Google review

Real excerpts from Google reviews. Read all reviews

Garage Door Spring Repair FAQ

How do I know if my garage door spring is broken?

Common signs are a loud bang from the garage, a visible gap in the spring above the door, a door that feels very heavy, or an opener that lifts the door only a few inches before stopping.

Can a garage door spring be replaced the same day?

Yes. R&Y Garage Door Repair carries common spring sizes and replaces most broken springs the same day in Taylor and nearby cities.

Should both springs be replaced at the same time?

On doors with two springs, yes in most cases. Both springs have done the same number of cycles, so the second one usually fails soon after the first.

Is it safe to replace a garage door spring myself?

No. Springs are under high tension and can cause serious injury. Replacement should be done by a trained technician with the right tools.

How long do garage door springs last?

Standard springs are typically rated for around 10,000 cycles, which is several years of normal use. High-cycle springs last longer on doors used many times a day.

Do you replace springs on weekends and at night?

Yes. R&Y answers broken spring emergencies 24 hours a day, 7 days a week, including weekends and holidays.

R&Y Garage Door Repair

125 Co Rd 497, Taylor, TX 76574
(512) 736-7290 · 24/7 emergency service

Related services

Service areas

Taylor · Hutto · Round Rock · Manor · Elgin · Georgetown · Pflugerville · All service areas →

Garage Door Spring Repair & Replacement

Quick Answer: What Should Be Done When a Garage Door Spring Breaks?

Why Spring Replacement Is a Job for a Technician

Spring Repair Services

Torsion Spring Replacement

Extension Spring Replacement

24/7 Broken Spring Service

High-Cycle Spring Upgrades

Cables, Drums and Bearings

TorqueMaster Systems

Torsion vs. Extension Springs: What’s the Difference?

How a Spring Replacement Works

What Customers Say

Garage Door Spring Repair FAQ

Request Garage Door Spring Repair Service

R&Y Garage Door Repair

Related services

Service areas

Response Time Calculator

Location

Taylor TX, United States

(512) 736-7290

Office Hours

Open 24 Hours, 7 Days a Week

24/7 Emergency Service

Maps

Our Location